List issue using Foscam Camera as CCTV System - Hi every one. Tonight, i would like post some documentation about using foscam as our some CCTV Cameras System. I know that this cameras is not good enough. Actually this cameras does not support PoE, so we found a lot trouble on that.Okay, here the list issue as long as using this foscam cameras :
Reset Method
I don't know where is the exactly best method, but i'm facing little bit confused. You can try using this method to avoid confusing on how to reset this camera.
How to reset Fl9805W method 1
1.Disconnect power
2.While hold reset button, connect power button
3.Wait until 30 seconds
How to reset Fl9805W method 2
1.Hold reset button 30 seconds
2.Disconnect power
Cant be displayed on the NVR(Centrix)
We are using really old NVR Centrix. Some cameras won't connected to NVR but recording. That was weird huh ? How to fix that ? For my experience, just try to add username and password admin/admin to camera, then Re Add again at NVR. If still no, then you should upgrade the firmware using latest firmware.
0 comments:
Post a Comment